Halcyon Marine Reef Salt Mix is a precisely formulated and manufactured mix of all of the necessary inorganic components of natural seawater in the proper ratios It is manufactured in small batches in our own factory under tight quality controls and is not simply another company’s product labeled with our brand It does not utilize any natural seawater desalinization residue or wastes, but is entirely manufactured from reagent grade, pharmaceutical grade, and tested and assayed ingredients This assures the finest quality salt available anywhere in the world
Halcyon has been developed through decades of testing and experience manufacturing salt mixes, not merely months, as other salts claim Halcyon combines the highest level of marine chemistry with the utmost knowledge of reef aquarium husbandry
PLEASE NOTE SALT TO WA , SA OR NT WILL ATTRACT
EXTRA FREIGHT CHARGES Halcyon, when mixed as directed, is formulated to provide a salinity of 35 ppt or a specific gravity of 1.026 g/cm3 (temperature corrected), alkalinity of 2.7 meq/l or 7.5 dKH, pH of 8.3, a calcium level of 415 ppm, and a magnesium level of 1,290 ppm
These are perfect values for the keeping and propagating of stony, particularly small polyped stony, corals and other invertebrates and fishes in reef aquariums Halcyon is well suited for use in all marine and brackish aquariums when specific gravity is adjusted for the needs of the inhabitants.
Use in aquarium keeping.Continuum recommends a 10 to 20% water change weekly to maintain a healthy reef or marine aquarium When something is wrong in your aquarium and you can’t put your finger on the problem, a good water change will often help
Water changes export pollutants, replenish nutrients, and tend to normalize the aquarium Continuum recommends that maintaining calcium levels between 410 and 450 mg/L (ppm), alkalinity between 7 to 11 dKH (2.5 to 4 meq/L), and magnesium levels between 1250 and 1350 mg/L (ppm) in reef aquariums Note: Aquarists keeping SPS corals should consider keeping alkalinity between 7 and 8 dKH, but certainly no more than 9 dKH (2.5 to 2.86, but not over 3.21 meq/L)
Alkalinity is extremely important, as a low alkalinity (below 7 dKH or 2.5 meq/L) will allow rapid pH drops Continuum recommends checking alkalinity at least once each week and, if need be, supplementing with Reef•Basis KH Buffer to maintain alkalinity levels and consistent pH.
Directions and protocol.In a separate container, mix Halcyon Marine Reef Salt Mix with water that has been purified via carbon and reverse osmosis, deionization or distillation If using tap water, first use Fraction to remove chlorine, chloramine and ammonia
Add 36 grams of Halcyon for every liter of water (a little less than half a cup per U.S gallon)
This will yield a salinity of approximately 35 ppt or a specific gravity of 1.026 (temperature corrected) Test the resultant solution with an accurate hydrometer or, preferably, a refractometer and add more water if the salinity is high or more Halcyon if it is low Allow to stand for a minimum of one hour, but optimally for 24 hours, to allow full pH stabilization
It is advised to use aeration, a power head, or both in the newly prepared mix Measure the temperature of the solution and add a heater, if necessary, to bring the solution to the same temperature as the aquarium prior to addition NEVER ADD SALT MIX DIRECTLY TO THE AQUARIUM.
Caution: Keep out of reach of children
Not for human consumption Contains dry salts to replicate seawater, if ingested drink plenty of water, consult your medical practitioner If in eyes flush with water for 15 minutes, if redness continues, consult your medical practitioner
If on skin flush with water May cause irritation of sensitive skin Use gloves when handling.